Silicone building waterproof agent

1.factory direct sales. 2.different content. 3.competitive price with good quality.

             building waterproof agent specification

A Detailed description

   This product is a new type of extremely easy dissolve building waterproof materials, has a waterproof, moistureproof, seepage control, permeability is strong, the anti-aging sex strong, strong and wear resistance of polluting, etc. This product can act as a wood, chipboard, paper, gypsum products waterproof material. This product is avirulent insipidity, no corrosion, no pollution, widely used in level, inside and outside metope, ground, toilet, basement, warehouse waterproof and reinforced concrete structure of the leakage, safe and convenient to use.

 

 

                           

Organo-silicone waterproofing agent (Methanesiliconic acid sodium salt)
Name	Content	Max
Half oxygen content	12%	15%
basicity	5-10%	5-10%
Water Dilution ratio	1:3	1:5
Colour	Colorless transparent	light yellow liquid
packing	200kg/drum (plastic drum)
Payment	T/T  L/C
DELIVERY	10 DAYS

  

Method of use:

 

One:Mix raw material of plaster boards and Organo-silicone waterproofing agent.

 

Mix them up until smooth.

 

Two: Directly onto the surface of the plasterboard.

 

Principle:half oxygen and Carbon dioxide produce chemical reaction,producing

 

Waterproof membrane.

The instructions

Spray brush: this product is diluted after seven times directly spray brush in the concrete, plaster, stones, metope ceramic tile, marble, surface interval two hours and then spraying it again, the surface is rough this product can directly spray or brush.

 

Dipping:this product is diluted after 12 times, immerse fiber board materials, such as brick building materials 2-3 hours, material itself to achieve the effect of waterproof.

 

Mixed with cement mortar: this product is six times diluted, and click the cement, sand: waterproof agent liquid = 1:2:0. 3 mixed directly use in direct cement mortar. Before the construction waterproof surface cleaning the required, after being dry, will surface of cracks, with putty or epoxy resin processing, the deal with crack, with waterproof agent in surface directly painted with 1-2 times, waterproof layer top by incorporating the cement mortar construction method, level with scraping thickness 1.5 -2.0 cm, in level area of over 100 square meters or more, leave the construction method of the expansion, divided into 10 x 10 m block, in dealing with adjustable seam. To have good the external walls of construction, the construction method with spray brush directly handle, not blow the metope of the ash, the mixed with cement mortar construction method, scraping the wipe thickness of 1.5 cm

 

Mixed with concrete: diluted by ten times the concrete, can be used in the basement waterproof, water tower the cistern waterproof, and construction, slope anti-permeability

Type of payment:     T/T   L/C

Deliver time   :10days after payment or depend on your requirement

Contact us:

Silicone building waterproof agent